Simple Copy Demo

Adapted from GNU Radio's own example (gr-blocks/examples/ctrlport/simple_copy.grc). The Copy block is enabled (upstream toggles it from an external ControlPort script).

Category Blocks
Blocks 8
Connections 5
File blocks/simple_copy.grc

Press Load to open this flowgraph in an editor embedded above, then ▶ to run it. Nothing is downloaded until you do.

Open in the full editor ▶ Download the .grc

Blocks used

Block	Module	Used
Add	`GNU Radio`	1
Copy	`GNU Radio`	1
Fast Noise Source	`GNU Radio`	1
Note	`GNU Radio`	1
QT GUI Time Sink	`GNU Radio`	1
Signal Source	`GNU Radio`	1
Throttle	`GNU Radio`	1
Variable	`GNU Radio`	1

Flowgraph source

blocks/simple_copy.grc

options:
  parameters:
    author: ''
    category: Custom
    cmake_opt: ''
    comment: ''
    copyright: ''
    description: Adapted from GNU Radio's own example (gr-blocks/examples/ctrlport/simple_copy.grc). The Copy block is enabled
      (upstream toggles it from an external ControlPort script).
    gen_cmake: 'On'
    gen_linking: dynamic
    generate_options: qt_gui
    hier_block_src_path: '.:'
    id: simple_copy
    max_nouts: '0'
    output_language: python
    placement: (0,0)
    qt_qss_theme: ''
    realtime_scheduling: ''
    run: 'True'
    run_command: '{python} -u {filename}'
    run_options: prompt
    sizing_mode: fixed
    thread_safe_setters: ''
    title: Simple Copy Demo
    window_size: 1280, 1024
  states:
    coordinate: [10, 10]
    rotation: 0
    state: enabled
blocks:
- name: samp_rate
  id: variable
  parameters:
    comment: ''
    value: '32000'
  states:
    coordinate: [580, 10]
    rotation: 0
    state: enabled
- name: analog_fastnoise_source_x_0
  id: analog_fastnoise_source_x
  parameters:
    affinity: ''
    alias: ''
    amp: '0.05'
    comment: ''
    maxoutbuf: '0'
    minoutbuf: '0'
    noise_type: analog.GR_GAUSSIAN
    samples: '8192'
    seed: '0'
    type: complex
  states:
    coordinate: [290, 270]
    rotation: 0
    state: enabled
- name: analog_sig_source_x_0
  id: analog_sig_source_x
  parameters:
    affinity: ''
    alias: ''
    comment: ''
    maxoutbuf: '0'
    minoutbuf: '0'
    offset: '0'
    samp_rate: samp_rate
    type: complex
    waveform: analog.GR_COS_WAVE
    frequency: '1000'
    amplitude: '0.5'
  states:
    coordinate: [10, 130]
    rotation: 0
    state: enabled
- name: blocks_add_xx_0
  id: blocks_add_xx
  parameters:
    affinity: ''
    alias: ''
    comment: ''
    maxoutbuf: '0'
    minoutbuf: '0'
    num_inputs: '2'
    type: complex
    vlen: '1'
  states:
    coordinate: [630, 150]
    rotation: 0
    state: enabled
- name: blocks_copy_0
  id: blocks_copy
  parameters:
    affinity: ''
    alias: ''
    comment: 'Use simple_copy_controller.py

      to enable/disablethis block'
    enabled: 'True'
    maxoutbuf: '0'
    minoutbuf: '0'
    showports: 'False'
    type: complex
    vlen: '1'
  states:
    coordinate: [870, 160]
    rotation: 0
    state: enabled
- name: blocks_throttle_0
  id: blocks_throttle2
  parameters:
    affinity: ''
    alias: ''
    comment: ''
    ignoretag: 'True'
    maxoutbuf: '0'
    minoutbuf: '0'
    samples_per_second: samp_rate
    type: complex
    vlen: '1'
    limit: time
    maximum: '0.1'
  states:
    coordinate: [290, 130]
    rotation: 0
    state: enabled
- name: note_0
  id: note
  parameters:
    alias: ''
    comment: 'Make sure to turn on ControlPort (edit ~/.gnuradio/config.conf)

      and run the following script to toggle Copy block:

      cd /src/gnuradio/gr-blocks/examples/ctrlport

      python simple_copy_controller.py 127.0.0.1 <PORT> true'
    note: ''
  states:
    coordinate: [750, 10]
    rotation: 0
    state: enabled
- name: qtgui_time_sink_x_0
  id: qtgui_time_sink_x
  parameters:
    affinity: ''
    alias: ''
    alpha1: '1.0'
    alpha10: '1.0'
    alpha2: '1.0'
    alpha3: '1.0'
    alpha4: '1.0'
    alpha5: '1.0'
    alpha6: '1.0'
    alpha7: '1.0'
    alpha8: '1.0'
    alpha9: '1.0'
    autoscale: 'False'
    axislabels: 'True'
    color1: blue
    color10: blue
    color2: red
    color3: green
    color4: black
    color5: cyan
    color6: magenta
    color7: yellow
    color8: dark red
    color9: dark green
    comment: ''
    ctrlpanel: 'False'
    entags: 'True'
    grid: 'False'
    gui_hint: ''
    label1: ''
    label10: ''
    label2: ''
    label3: ''
    label4: ''
    label5: ''
    label6: ''
    label7: ''
    label8: ''
    label9: ''
    legend: 'False'
    marker1: '-1'
    marker10: '-1'
    marker2: '-1'
    marker3: '-1'
    marker4: '-1'
    marker5: '-1'
    marker6: '-1'
    marker7: '-1'
    marker8: '-1'
    marker9: '-1'
    name: '""'
    nconnections: '1'
    size: '1024'
    stemplot: 'False'
    style1: '1'
    style10: '1'
    style2: '1'
    style3: '1'
    style4: '1'
    style5: '1'
    style6: '1'
    style7: '1'
    style8: '1'
    style9: '1'
    tr_chan: '0'
    tr_delay: '0'
    tr_level: '0.0'
    tr_mode: qtgui.TRIG_MODE_FREE
    tr_slope: qtgui.TRIG_SLOPE_POS
    tr_tag: '""'
    type: complex
    update_time: '0.10'
    width1: '1'
    width10: '1'
    width2: '1'
    width3: '1'
    width4: '1'
    width5: '1'
    width6: '1'
    width7: '1'
    width8: '1'
    width9: '1'
    ylabel: Amplitude
    ymax: '1'
    ymin: '-1'
    yunit: '""'
    samp_rate: samp_rate
  states:
    coordinate: [1140, 140]
    rotation: 0
    state: enabled
connections:
- [analog_fastnoise_source_x_0, '0', blocks_add_xx_0, '1']
- [analog_sig_source_x_0, '0', blocks_throttle_0, '0']
- [blocks_add_xx_0, '0', blocks_copy_0, '0']
- [blocks_copy_0, '0', qtgui_time_sink_x_0, '0']
- [blocks_throttle_0, '0', blocks_add_xx_0, '0']
metadata:
  file_format: 1